Why acrylic sheet backlit is a good choice for luminous wall/ceiling?

Oct 08, 2025

Leave a message

1. Optical performance

The light transmission rate of the acrylic sheet backlit is as high as 92%, which is better than ordinary glass and traditional light box cloth, and the light penetration loss is small, even with low low-power LED light source can maintain high brightness. Through the laser dot engraving technology in the back of the sheet custom light guide point, the side light source of the LED strip light spread evenly to the front of the panel, to avoid the drawbacks of the traditional material near the light source at the bright, far from the light source at the dark, presenting no dark areas, no light spot 'shadowless light effect', compared with ordinary frosted glass and PC board, the light effect is more uniform and is not easy to yellowing. Decay.

 

2. Cost-effectiveness

Acrylic sheet backlit unit price of 80-200 yuan / square meter (thickness of 3-8mm), much lower than the glass light guide plate and stone translucent panels, and lightweight, with low handling costs. With an LED side light source, energy consumption is only 30% of the traditional light box, 10 square meters of light-emitting wall daily power consumption of about 0.5 degrees.

 

3. Design Freedom

Acrylic sheet backlit has strong plasticity, support for hot bending, cutting, carving, and other processes, can create curved walls, shaped splicing and other modeling, the minimum bending radius of up to 100 times the thickness of the board (eg, 3mm board can be bent to R30cm arc), easy to achieve curved light-emitting ceiling and other designs. The base color can be selected from transparent, milky white, or color, combined with digital spray painting or laminated printing, and can be customized with gradient, starry sky roof, imitation wood grain, stone grain translucent wall, and other effects.

 

4. Installation convenience: fast landing, lightweight solutions

Acrylic density is only half that of glass; a single person can be transported and installed, a 2m × 1m sheet weighing about 15kg, with low requirements for the installation framework, aluminum alloy profiles, or wood keel can be supported. The acrylic sheet backlit installation process is simple. The wall is pre-buried after the power supply, fixed LED strip on the side, stuck into the acrylic plate, and covered with a border compression strip, 100 square meters of the project from the start of work to Lighting ≤ 3 days, no need for a professional construction team, DIY friendly.

Send Inquiry
Zhejiang Huasu Acrylic Technology Co., Ltd
Promotional items support / Sales Support / Give solutions within 6 hours
contact us